All about updating WSSv3 and MOSS2007


As repeatedly asked and apparently still confusing the IT folks,  I’ll post some information’s and what to consider how, during and while updating WSSv3 and MOSS 2007.


  1. Support Life Cycle: 
    As already announced you should be aware of the retirement of SP1 for WSSv3 which also affects MOSS as it relies on WSSv3
  2. WSS/MOSS SP2 requirement / mandatory now!

      SP2 for WSS and MOSS is now mandatory for all additional cumulative updates starting on august 2010 CU, as these are not containing other updates prior SP2!  Also the language pack SP2 is mandatory now!
    Please consider the correct installation order and install always first all updates for the according language packs and then the WSS and MOSS updates!
  3. Backup your Farm/Servers!
    It should be mandatory but anyway it is highly recommended that you perform a Full and complete backup of your whole SharePoint Farm and the SQL Server.
    This can be done in either using the following steps:
    – Go to “Central Admin Page – Operations – Backup and Restore – Perform a backup” and select a complete backup
    – Go to SQL Server and perform on Management Studio a database backup of all your content databases
    – Use the operating system function “ntbackup” (Server 2003) or “Windows Server Backup” (Server 2008) and choose “FULL” (including System state)

    Usually it is not supported to restore the configuration database and therefore not relevant to backup it.
    There is only one exception but not relevant for this topic here. Please check here for more information if required:  Move all Databases (MOSS)(WSSv3)
  4. Language Packs:
    In addition to the service packs and updates for WSSv3 and MOSS, consider that on using Language Packs, you need to install also in relation the according service packs for the language packs prior to the intended WSS/MOSS update!


    – You have MOSS 2007 with SP1 and Language packs but no SP1 for those  –> Install soon the SP1 for the appropriate language pack!
    – You have MOSS 2007 with SP2 and Language packs with SP1 –> Install soon the SP2 for the appropriate language packs as well!
    – You have… regardless which constellation, you should always stay close together with the respective service packs for WSS/MOSS 
      and the relation to the according Language pack – service packs ! If not yet happened, with the next CU in April 2010, the SP2 of the language packs will be a real mandatory step!
    Otherwise you may expect several unwanted issues later on in your environment.

    Back to TOP

  5. Consider the order of the installation 
    On a pure WSSv3 it is quiet clear, just install the WSS package and you’re fine 😉
    Now disconnect or prevent users from using the server farm by stopping the “World Wide Web Publishing service” (w3svc) on all Web servers.–> Having a MOSS Server Farm (all on one Box/single Server):
      1. Install the WSS package, don’t run PSConfig Wizard (simply cancel it) 
      2. Install the MOSS package,
      3. Run on last the PSConfig Wizard and watch the logs for errors 
          by default, located on:   %COMMONPROGRAMFILES%Microsoft Sharedweb server extensions12LOGS  

    Note:  If the wizard does not start automatically, click Start, point to All Programs, point to Administrative Tools, and then click SharePoint Products and Technologies Configuration Wizard.

    –>  Having a MOSS Farm with more than one Server: 
      Start on the first Server in Farm, usually the Application Server that is hosting the central admin:
      1. Install the WSS package and run PSConfig Wizard but do not finish it! – Wait as prompted until your last server in farm has been updated as well
          You should receive this message :

        You must run Setup to install new binary files for every server in your server farm. If you have multiple servers in your server farm, run Setup and the configuration wizard on the other servers now, and then return to this server and click OK to continue.

      2. Run on all other servers the WSS package and the PSConfig Wizard 
      3. When all servers are updated, go back to the first server you started and finish the PSConfig Wizard on this Server. Watch the logs for errors. 
      4. Now Install the MOSS package in same manner as the WSS package and end again with the first server to finish the PSConfig Wizard.

    Note: You can install the MOSS update binaries immediately followed by the WSS update binaries. After both of these have been completed PSCONFIG can be used to upgrade the farm for both service packs in one step. The reason I suggest running PSConfig for each SP is that in the event of an upgrade failure it will make troubleshooting that much easier because you only need to check for that particular patch you just installed!

  6. When everything went good with no errors, you should find now in central admin page on “Operations – Servers in Farm” the according Built Number to the installed update.
    You can find a table with all Build Numbers and its according download links to the respective bits and KB articles on my “MOSS/WSS Update cube sheet”  To force a software update 
    1.  Force a software update operation by opening a Command Prompt window and changing to the following directory:
            %COMMONPROGRAMFILES%Microsoft sharedweb server extensions12bin 
    2.  Type the following command:   psconfig –cmd upgrade –inplace b2b –wait –force   (Syntax and description of psconfig)
  7. Do you get the error: “The expected version of the product was not found on the system” when installing a SharePoint Update?
    If yes, check this blog post for more information 😉Back to TOP
  8. Q & A:
    Q: Why do I have to start with the central admin host on running then PSConfig Wizard?
    A: This is because the first server in farm on setup creates the configuration database and usually then hosts the central admin. When we update the farm, the first update is written against the config DB and that will affect the central admin as well. You will see this message after starting:
    You must run Setup to install new binary files for every server in your server farm. If you have multiple servers in your server farm, run Setup and the configuration wizard on the other servers now, and then return to this server and click OK to continue. “All other servers in Farm then needs to be updated as well by running the PSConfig wizard “one-by-one” to update the registries, ACL’s and several other files and binaries. Once finished you’ll go back to the central admin host where you started and click the “finish” button.

    Q: Can I install SP2 directly on RTM or do I have to keep the order of pre-published updates and packages to install before?
    A: Yes, you can install SP2 directly on top of RTM. All prior released updates are included in the SP2 package.

    Q: Can I install any update package free of choice regardless if published prior or after a certain service pack?
    A: In general: Yes,  BUT… we highly recommend to respect each update package like cumulative updates to be observed as they would rely on the prior published Service pack.
    For example:
        The infrastructure update published in 2008 should be considered in relation to prior SP1.
        The feb. CU published in 2010 should be considered as it would rely on SP2, and so on. 
        There are also lots of more dependencies that may lead to many issues which will not be explained all in detail here.

    Q: Can I install SP2 for MOSS/WSS even if I have only language pack SP1 installed?
    A: Yes, BUT…
      we highly recommend to respect as well here also the relation between each service pack level.
        For example: 
        If you have WSS/MOSS Language packs installed on a WSS/MOSS SP1 farm,. you should have also installed accordingly the SP1 for the language packs.
        The same is valid for each SP2 (WSS/MOSS related to the according language pack).
    There’ll be also in this case lots of more dependencies that may lead to unexpected issues which will not be explained further here.

    Note!   In future, for any CU it is mandatory to have installed the according service packs to each language pack when in use!
                So when you’re still on SP1 with your language packs, you must update to SP2 for the language packs before you can apply the next CU.

  9. Additional Information’s and links:
    Updates Resource Center for SharePoint Products and Technologies
    Support Lifecycle Site Information
    SP2 and Language Packs
    Additional information about WSS 3.0 and MOSS 2007 Language Packs
    WSS and MOSS Language Pack Slipstreaming
    How to Deploy ALL MOSS Server Updates – General Information
    The Mystery Behind SharePoint 2010 Patching by Jie Li
    Back to TOP

    Download Links for Language Packs:

    Deploy language packs (Windows SharePoint Services 3.0)

    Deploy language packs (Office SharePoint Server)

    32-bit (download both)
    Windows SharePoint Services 3.0 Language Pack
    2007 Office System Language Packs

    32-bit, SP1 (download both)
    Windows SharePoint Services 3.0 Language Pack Service Pack 1 (SP1)
    Microsoft Office Language Pack 2007 Service Pack 1 (SP1)

    32-bit, SP2 (download both)
    Windows SharePoint Services Language Template Pack Service Pack 2 (SP2)
    Microsoft Office Language Pack 2007 Service Pack 2 (SP2)

    64-bit (download both)
    Windows SharePoint Services 3.0 Language Pack x64
    SharePoint Server 2007 Language Pack (x64)

    64-bit, SP1 (download both)
    Windows SharePoint Services 3.0 Language Pack Service Pack 1 (SP1), 64-Bit Edition
    The 2007 Microsoft Office Servers Language Pack Service Pack 1 (SP1), 64-Bit Edition

    64-bit, SP2 (download both)
    Windows SharePoint Services 3.0 Language Pack Service Pack 2 (SP2), 64-Bit Edition
    The 2007 Microsoft Office Servers Language Pack Service Pack 2 (SP2), 64-Bit Edition

    Download Links for all other WSS and MOSS updates and Service Packs:
    WSS/MOSS 2007 updates (cube sheet)

    Back to TOP

    Hth and greetings,
    Steve  Chen, Support Engineer – EMEA GTSC



8 thoughts on “All about updating WSSv3 and MOSS2007

  1. Hi Paul, I'm sorry but this is to be investigated with MS Support. Please raise a ticket for this since this requires deeper technical tweaks to solve and cant be discussed here.
    There is just one thing that I would try if applicable, run PSConfig wizard and disconnect that one server from farm if it is not the only one!  Then retry to patch the remaining servers and if that works, you can add back the already patched server to the farm again, maybe that could be a workaround…
    cheers, Steve


  2. Hi Steve,

    Thanks for the post.

    –> Having a MOSS Server Farm (all on one Box/single Server):
    1. Install the WSS package, don't run PSConfig Wizard (simply cancel it)

    Unfortunately, I didn't cancel and I let PSConfig run to completion. Now when I try to install the MOSS SP3 package, it fails right away.

    What can I do now?!!!




  3. Your backup is from a different version of Windows SharePoint Services and canno t be restored to a server running the current version. The backup file should be restored to a server with version '' or later. any idea pls

    Thanks in Advance


  4. Hi Steve, installing June 2010 CU on a SharePoint 2007 (single server) I get the error "The expected version is not installed on your system". On the same farm the WSS June 2010 CU has been installed  and configuration wizard  has been run. Is there a way to correct my farm?


  5. Hi Ricardo,
    First of all, you need to install the update packages according to the language of SharePoint you installed at setup. Next to check is if you have installed additionally  "language packs for SharePoint" and if they're on the SP2 level updated as well (not SP2 for SharePoint meant here!)And finally, did you have SharePoint on SP2 for MOSS and WSS patched or did you installing the June 2010 CU just on top of any other patch level at SharePoint prior SP2?This might also cause an error as we recommend to have only the CU packages according to its prior published Service packs to be installed.
    Hth, greets Steve


  6. @velmurugan:
    This seems to be a security Update placed on MOSS Server/WSSv3 – please check this Link here for more:
    MS14-022: Description of the security update for SharePoint Server 2007: May 13, 2014
    Microsoft_office_server_conversions_launcher_exe 12.0.6690.5000 96,976 16-Nov-2013 03:06

    Microsoft_office_server_conversions_loadbalancer_exe 12.0.6690.5000 47,824 16-Nov-2013 03:06

    So I’d guess, you have the Security fix installed and that’s the expected patch level your restore is looking for.
    Hope that helps,
    cheers, Steve


Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s